Inconel 82/ERNiCr-3 Nickel bare alloy MIG Welding wire
Specifications:
Inconel 82/ERNiCr-3
MIG/TIG welding
standard:AWS A5.14/ASME SFA 5.14/UNS N06082
DI:0.8mm,1.2mm, 1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
ERNiCr-3 is designed for the welding of alloys 600,601 and 800 to themselves, for the clad
side of joints in steel clad with nickel-chromium- iron alloys and for dissimilar welding of
nickel-based alloys. It is also utilized to oin carbon steels to nickel alloys and carbon steels.
Arcos 382 provides high strength and good corrosion resistance, resists oxidation and
delivers creep-ruptrue strength at elevated temperatures.
CLASSIFICATIONS:
ERNICr-3
AWS A5.14
ASME SFA 5.14
UNS N06082
APPROVALS:
MIL-E-21562
MIL-EN/RN82
APPLICATIONS:
Formulated to resist pitting corrosion and stress-corrosion cracking in chloride containing
environments, ERNICr-3 is ideal for welding in desalination plans.it is also well suited for
welding in a variety of temperatures-from cryogenic to elevated-in such applications as
piping,furnace equipment,and perto-chemical and power generation plants.
DIAMETERS:
0.8mm,1.2mm, 1.6mm,
2.0mm, 2.4mm, 3.2mm,
4.0mm
TYPICAL
MECHANICAL PROPERTIES:
TENSILE STRENGTH(PSI) 80,000
PERCENT ELONGATION 30
TYPICAL
CHEMICAL COMPOSITION:
C Mn P S Si Ni
0.05 3.00 0.001 0.002 0.15 73.20
Cr Fe Ti Cb Ta
19.40 1.20 0.36 2.50
